Choose The Most Suitable Off-road Car Light
In the refitting shop, there are a lot of off-road vehicle lights, which seems to show that the lack of these lights is not an off-road vehicle. It is true that an off-road vehicle that often travels far does need light modification to improve its safety. It is impossible to imagine driving a off-road vehicle that only uses the light of the original vehicle at night in the sparsely populated Gobi or desert, staggering on rugged mountain roads, or traveling through the jungle. It's not appropriate to use national highways, provincial highways or highways at night. Besides, you may be affected by heavy fog, heavy rain, sand and dust.
In fact, it is very simple. First of all, there is very little room for the original car lamp to be changed. At present, the original car lamp is modified by various methods to improve its brightness, such as using brightening lines, increasing the wattage of the lamp, and increasing the color temperature of the lamp (exchanging xenon lamp). Such methods often increase the load of the original car line or increase the potential safety hazards.
Secondly, the original car lights are mostly used to meet the needs of urban and suburban roads with better lighting. If the original car lights are modified to improve the brightness, the use in the city will inevitably affect the sight of others. Not only does it not improve the safety, but it seriously affects the safety of others, which is much worse than the frequent use of high-light in the city. For off-road vehicles, the additional auxiliary lights are controlled by independent lines and switches, which can only be opened when needed, not to affect the original line.
For lamps and lanterns, the lighting effect is obvious when the wattage of the bulb is large, and the visual effect is good when the color temperature of the lamp is high, but the penetration ability is low. Therefore, the auxiliary lamps and lanterns of off-road vehicles can be selected according to their use, but it is not necessary to pursue high color temperature.
The distribution of fog light, auxiliary driving light, spotlight and floodlight are shown as follows:
In the actual product sequence, there are not many fog lamp products purely focusing on large illumination range, and they are not suitable for off-road vehicles as the main lighting. Generally, single fog lamp is chosen as backup auxiliary lighting or temporary site lighting, which has great limitations. Most off-road owners often choose special types of work lights to replace them.
Driving light type is more concentrated, the irradiation distance is long, and there is a certain amount of floodlight can take into account the lighting in close range. This is our first choice of auxiliary lamps installed on the front bars, but also the main lamps used. The basic principle of installing headbar lamps is not to affect the driver's sight. The auxiliary lamps installed are more beautiful and durable on the same horizontal line as the original lights.
Spotlight, also known as spotlight, has a very concentrated beam, a longer irradiation distance and less flooding, which is very suitable for installation on the roof rack. When installing, we must pay great attention to the upper edge of the lamp can not exceed the extension line of the windshield, so as to avoid the reflection on the hood, and even cause the reflection of the windshield, which constitutes a great obstacle to safe driving. That's why spotlights are chosen on luggage racks.
Do not blindly pursue high-power and most of the car lights, reasonable collocation is the best choice!
Auxiliary lighting installation process requirements are more stringent, it is generally recommended to choose a relatively professional refitting shop. At the same time, the owner himself should carefully supervise the construction, and be familiar with the line laying and switching position. First of all, the data provided by the vehicle generator should be used to determine how much additional lamps can be loaded, so as to avoid the occurrence of insufficient power supply of the generator, and to select the appropriate combination of lamps and lanterns.
1) Avoid using the original vehicle lamp line as far as possible. It is necessary to lay additional lamp line and wrap it with sleeve and fix it firmly.
2) Lamps and lanterns need to be insured separately. If conditions permit, they should pass through the safety box of the original car or set up insurance separately, which should be placed in a reliable and obvious position. The owner must be aware of it.
3) The relay must be installed before the switch in order to control the weak current and the strong current, so as to ensure safety.
4) The switch is independent, avoid using with the original car switch as much as possible. In addition, if conditions permit, the circuit should be connected with the original car lamp controller, so as to realize the power-off of all auxiliary lights when the car lock is closed, so as to eliminate the hidden danger of excessive discharge of batteries caused by forgetting to turn off the lights.
5) It is better to use plug connection between the lamp and the lamp line, so as to facilitate the maintenance and temporary removal of the lamp.
Choosing the most suitable and practical lamp for your beloved SUV seems to be an endless topic. Remember, the most important thing is to choose the right light for your car.
