How to Install LED Lights Bar
Step1:
Make sure you need length and cut through copper contact strip.
step2:
With no welding wire connected to the strip. Insert the threads of the short end of the clamp, match the color line of the corresponding letter on the clamp at the other end of the LED. Their order may not be the same, so you may need to be rearranged. Clamping clip, without stripping.
Step3:
The controller that you can change the color or dim the lights. If you want to achieve this effect, you need a controller. Strip color wires, and aim at each port on a corresponding controller. Tighten the screw them clamped in place.
Step4:
Remove the adhesive backing, put them on the need of light.
Step5:
Connect the article LED lights to a plus or minus 12 v lead to the controller. If install them at home, please insert the transformer controller, and then insert the transformer outlet.
